spec no: dsad0978 rev no: v.5 date: mar/15/2005 page: 1 of 4 approved: j. lu checked: allen liu drawn: w.j.zhu erp:1203000335 3.2x1.6mm smd chip led lamp package dimension s notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.2(0.008") unless otherwise noted. 3. specifications are subject to change without notice. features 3.2mmx1.6mm smt led, 1.1mm thickness. low power consumption. wide viewing angle. ideal for backlight and indicator. various colors and lens types available. package : 2000pcs / reel. rohs compliant. AP3216EC high efficiency red description the high efficiency red source color devices are made with gallium arsenide phosphide on gallium phosphide orange light emitting diode.
spec no: dsad0978 rev no: v.5 date: mar/15/2005 page: 2 of 4 approved: j. lu checked: allen liu drawn: w.j.zhu erp:1203000335 selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 1/2 AP3216EC high efficiency red (gaasp/gap) water clear 4 12 120 symbol parameter device typ. max. test conditions units peak peak wavelength high efficiency red 627 nm i f =20ma d dominant wavelength high efficiency red 625 nm i f =20ma ? 1/2 spectral line half - width high efficiency red 45 nm i f =20ma c capacitance high efficiency red 15 pf v f =0v;f=1mhz v f forward voltage high efficiency red 2.0 2.5 v i f =20ma i r reverse current high efficiency red 10 ua v r = 5v parameter high efficiency red units power dissipation 105 mw dc forward current 30 ma peak forward current [1] 160 ma reverse voltage 5 v operating/storage temperature - 40c to +85c
spec no: dsad0978 rev no: v.5 date: mar/15/2005 page: 3 of 4 approved: j. lu checked: allen liu drawn: w.j.zhu erp:1203000335 high efficiency red AP3216EC
spec no: dsad0978 rev no: v.5 date: mar/15/2005 page: 4 of 4 approved: j. lu checked: allen liu drawn: w.j.zhu erp:1203000335 recommended soldering pattern (units : mm ) AP3216EC tape specifications (units : mm ) remarks: if special sorting is required (e.g. binning based on forward voltage,luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|
